| Content | Orac WX205
L 200 x H 200 x W 1.3 cm Purotouch
Get your interior right on TRACK with this linear WX205 wall panel. Its rectangular, fluted lines are presented in two sets of proportions as the product can be used on both sides. The choice is yours. RIPPLE and TRACK are Orac Decor’s newest 3D Wall Covering panels, now available in Duropolymer and longer lengths for the first time to empower your walls. Perfect to cover full ceiling heights in one go or for low wainscoting in demanding environments. Only side A is primed. On side B, use two coats of final paint or apply a primer coat first, followed by the final paint.
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac Decor W117 Slope
L 100 x H 100 x W 2.3 cm
W117 SLOPE is a product that has many faces: a unique shape, a unique format, a unique surface. Orio Tonini designed this fascinating play of light and shadow that delivers a transformative effect on the wall. A fun yet strong square-sized building block for your interior design.
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac Decor W119 Bar Mix
L 200 x H 25 x W 2 cm
W119 BAR MIX is the keystone to any linear wall design and the newest member of the BAR family. Controlled irregularity that cooperates with our existing BAR and BAR XL to create a unique and intriguing interior code. Combine with CX190 and SX194 for an endless linear pattern, ready to bring walls and colours to life.
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | W106 – Envelop
L 33.3 x H 2.9 x W 33.3 cm
Envelop is part of the 3D Wall Panels collection. Release your creativity and design a unique work of art that is a perfect fit for you and your interior. Play around with various shapes and use fun colour accents as a finishing touch. Designed by Orio Tonini.
TECHNICAL DETAILS
Width:33.3 cm
Height:2.9 cm
Length:33.3 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | W116 Bar XL
L 200 x H 25 x W2 cm Purotouch
W116 BAR XL is the newest proportional counterpart to W111 BAR, also designed by Orio Tonini. Together this perfectly balanced duo offers endless possibilities to cover your walls with personality. Play with the rhythm of the different sizes and make rooms and colours come to life.
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | W109 VALLEY
L 200 x H 25 x W 1.3 cm Purotouch
Valley is part of the 3D Wall Covering collection. Release your creativity and design a unique work of art that is a perfect fit for you and your interior. Play around with various shapes and use fun colour accents as a finishing touch. Designed by Orio Tonini. To cover 1 square meter you need 2 pieces.
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page |
Reviews
There are no reviews yet.