| Content | W116 Bar XL
L 200 x H 25 x W2 cm Purotouch
W116 BAR XL is the newest proportional counterpart to W111 BAR, also designed by Orio Tonini. Together this perfectly balanced duo offers endless possibilities to cover your walls with personality. Play with the rhythm of the different sizes and make rooms and colours come to life.
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | W105 – Rombus
30 x 34.6 x 3 cm
The geometric design Rombus is part of the 3D Wall Panels collection. It is the basic ingredient for endless creative applications and can be combined with Rombus W100 and Trapezium W101. Create sleek patterns or a playful interpretation using bright accent colours.
TECHNICAL DETAILS
Width:3 cm
Height:34.6 cm
Length:30 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac W111 Bar
L 200 x H 25 x W 2 cm
The Orac Decor W111 BAR is the straightforward addition to ZIGZAG, VALLEY and HILL profiles. Designed to fit perfectly with CX190 and SX194 it offers endless possibilities and fast finishing. Cover wall sections from top to bottom to add give an immediate wow effect to any room or use.
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | W101 – Trapezium
34.5 x 15 x 2.9 cm
The geometric design Trapezium is part of the 3D Wall Panels collection. It is the basic ingredient for endless creative applications and can be combined with Rombus (ref. W100). Create sleek patterns or a playful interpretation using bright accent colours.
TECHNICAL DETAILS
Width:2.9 cm
Height:15 cm
Length:34.5 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac W120 AUTOIRE
L 150 x H 3.2 x W 50 cm
The W120 Wall Panel is unique: a ready-made wall panel with a lot of detail for easy, fast and beautifully finished installation. It is an economical solution for wall depth creation and can be made even more dynamic by filling it up with our insert W122 and/or W123.
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | W100 – Rombus
25.8 x 15 x 2.9 cm
The geometric design Rombus is part of the 3D Wall Panels collection. It is the basic ingredient for endless creative applications and can be combined with Trapezium (ref. W101). Create sleek patterns or a playful interpretation using bright accent colours.
TECHNICAL DETAILS
Width:2.9 cm
Height:15 cm
Length:25.8 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page |
Reviews
There are no reviews yet.