Content | Orac PX169
200 x 5.5 x 3.4 cm
Horizontal profile to finish of the wainscoting made of PX147 and PX169. Add a skirting board (e.g. SX165) for a perfect result.
Use panel mouldings to create wall frames or wainscoting. These can evoke the atmosphere of stately homes, and tastefully protect your walls. They are equally suitable for both modern and classical homes, and can bring texture to any wall.
TECHNICAL DETAILS
Width:3.4 cm
Height:5.5 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | CR807 Panel Mouldings
200 x 1.5 x 5.4 cm
A classical panel moulding inspired by classical architecture. This fine design will have a magnificent effect on your space.
Elite Decor is one of the leading manufacturers of Polyurethane mouldings.
TECHNICAL DETAILS
Width:1.5 cm
Height:5.4 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | CR911 Panel Mouldings
200 x 3.5 x 7.1 cm
A classical panel moulding inspired by classical architecture. This fine design will have a magnificent effect on your space.
Elite Decor is one of the leading manufacturers of Polyurethane mouldings.
TECHNICAL DETAILS
Width:3.5 cm
Height:7.1 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | CR807A Panel Moulding Corner
200 x 30 x 30 cm
A classical panel moulding corner inspired by classical architecture. This fine design will have a magnificent effect on your space.
Elite Decor is one of the leading manufacturers of Polyurethane mouldings.
TECHNICAL DETAILS
Thickness:3.5 cm
Height:30 cm
Length:30 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac P1020
200 x 4.9 x 2.4 cm
The intertwined spiral acanthus leaves and almonds of this ornament will bring a bucolic atsmosphere indoors.
Exists in Flex. Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all!
TECHNICAL DETAILS
Width:2.4 cm
Height:4.9 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac P3020A
42.5 x 42.5 x 4 cm
Richly decorated corner adorned with a beautiful acanthus leaves. Great to re-create classic yet eccentric interiors with personality. The perfect match with C338, C338A, C338B, P3020.
A decorative design, inspired by classical master pieces, adorned with fine details, that can bring back the character of a renovated house or contrasts with modern elements to enrich any setting.
TECHNICAL DETAILS
Width:4 cm
Height:42.5 cm
Length:42.5 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page |
Reviews
There are no reviews yet.