Orac P1020

In Stock

L 200 x H 4.9 x W 2.4 cm

£35.40

In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Compare
SKU: 5414433039424
Category:

Description

Orac P1020

200 x 4.9 x 2.4 cm

The intertwined spiral acanthus leaves and almonds of this ornament will bring a bucolic atsmosphere indoors.

Exists in Flex. Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all!

TECHNICAL DETAILS
Width:2.4 cm
Height:4.9 cm
Length:200 cm

The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.

When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.

When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.

For ideas or inspiration have a look at our Instagram page

Reviews

There are no reviews yet.

Be the first to review “Orac P1020”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsOrac P1020 removeOrac P3070 removeElite Decor CR863A removeOrac P5020 removeOrac P3020A removeElite Decor HCR 501-1 remove
ImageOrac Decor P1020Orac Decor P3070Elite Decor CR863AOrac Decor P5020Orac Decor P3020aElite Decor HCR 501-1
SKU541443303942454144330123809178305690460541443303952354144330135479685750043616
Rating
Price£35.40£49.50£13.00£54.50£37.00£3.70
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

DescriptionL 200 x H 4.9 x W 2.4 cmL 200 x H 12.5 x W 3.2 cmL 22 x H 22 x W 2.3 cm200 x 3.1 x 0.9 cmL 42.5 x H 42.5 x W 4 cm15.4 x 15.4 cm
Content

Orac P1020

200 x 4.9 x 2.4 cm

The intertwined spiral acanthus leaves and almonds of this ornament will bring a bucolic atsmosphere indoors. Exists in Flex. Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all! TECHNICAL DETAILS Width:2.4 cm Height:4.9 cm Length:200 cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs. For ideas or inspiration have a look at our Instagram page

Orac P3070 – Radius

200 x 12.5 x 3.2 cm

The versatile Radius is one of Ulf Moritz’s favourites, simply because it is so simple and distinguished. Powerful enough to stand alone, but also offers endless possibilities used in combination. Why not create a skirting with all the Radius profiles on top of one another? TECHNICAL DETAILS Width:3.2 cm Height:12.5 cm Length:200 cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs. For ideas or inspiration have a look at our Instagram page

CR863A Panel Moulding Corner

20 x 20 x 2.3 cm

A classical panel moulding corner inspired by classical architecture. This fine design will have a magnificent effect on your space. Elite Decor is one of the leading manufacturers of Polyurethane mouldings.   TECHNICAL DETAILS Width:22 cm Height:22 cm Thickness:2.3 cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs. For ideas or inspiration have a look at our Instagram page

Orac P5020

200 x 9.1 x 1.3 cm

Simple, flat panel moulding with a linear design. Combine it with P5020B for a stylish wall frame. TECHNICAL DETAILS Width:1.3 cm Height:9.1 cm Length:200 cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.   For ideas or inspiration have a look at our Instagram page

Orac P3020A

42.5 x 42.5 x 4 cm

Richly decorated corner adorned with a beautiful acanthus leaves. Great to re-create classic yet eccentric interiors with personality. The perfect match with C338C338AC338BP3020. A decorative design, inspired by classical master pieces, adorned with fine details, that can bring back the character of a renovated house or contrasts with modern elements to enrich any setting. TECHNICAL DETAILS Width:4 cm Height:42.5 cm Length:42.5 cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs. For ideas or inspiration have a look at our Instagram page

HCR 501-1 Corner

15.4 x 15.4cm

A classical Corner Element for completing panel designs using the Elite Decor HCR 501 Panel Moulding. Elite Decor is one of the leading manufacturers of Polyurethane mouldings.   TECHNICAL DETAILS 15.4 x 15.4cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs. For ideas or inspiration have a look at our Instagram page
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information