Orac P3020

In Stock

L 200 x H 6.1 x W 3.2 cm

£43.70

In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Compare
SKU: 5414433039462
Category:

Description

Orac P3020 Panel Moulding

L 200 x H 6.1 x W 3.2 cm

Rounded panel moulding with an organic acanthus leaf design. Combine it with P3020A for a wall frame full of character.

 

TECHNICAL DETAILS
Length: 200cm

Height: 6.1cm

Width: 3.2cm

The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.

When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.

When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.

For ideas or inspiration have a look at our Instagram page

Reviews

There are no reviews yet.

Be the first to review “Orac P3020”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsOrac P3020 removeOrac P5020 removeOrac P1020 removeOrac P101A removeElite Decor CR911 removeElite Decor CR863B remove
NameOrac P3020 removeOrac P5020 removeOrac P1020 removeOrac P101A removeElite Decor CR911 removeElite Decor CR863B remove
ImageOrac Decoe P3020Orac Decor P5020Orac Decor P1020Orac Decor P101aElite Decor CR911Elite Decor CR863B
SKU541443303946254144330395235414433039424541443303992975437899980294823087101226
Rating
Price£43.70£54.50£35.40£21.70£37.00£6.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

DescriptionL 200 x H 6.1 x W 3.2 cm200 x 3.1 x 0.9 cmL 200 x H 4.9 x W 2.4 cmL 24.5 x H 24.5 x W 2.4 cmL 200 x H 7.1 x W 3.5 cmL 18 x H 18 x W 1.5 cm
Content

Orac P3020 Panel Moulding

L 200 x H 6.1 x W 3.2 cm

Rounded panel moulding with an organic acanthus leaf design. Combine it with P3020A for a wall frame full of character.   TECHNICAL DETAILS Length: 200cm Height: 6.1cm Width: 3.2cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs. For ideas or inspiration have a look at our Instagram page

Orac P5020

200 x 9.1 x 1.3 cm

Simple, flat panel moulding with a linear design. Combine it with P5020B for a stylish wall frame. TECHNICAL DETAILS Width:1.3 cm Height:9.1 cm Length:200 cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.   For ideas or inspiration have a look at our Instagram page

Orac P1020

200 x 4.9 x 2.4 cm

The intertwined spiral acanthus leaves and almonds of this ornament will bring a bucolic atsmosphere indoors. Exists in Flex. Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all! TECHNICAL DETAILS Width:2.4 cm Height:4.9 cm Length:200 cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs. For ideas or inspiration have a look at our Instagram page

Orac P101A

24.5 x 24.5 x 2.4 cm

The intertwined spiral acanthus leaves and almonds of this ornament will bring a bucolic atmosphere indoors. TECHNICAL DETAILS Width:2.4 cm Height:24.5 cm Length:24.5 cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs. For ideas or inspiration have a look at our Instagram page

CR911 Panel Mouldings

200 x 3.5 x 7.1 cm

A classical panel moulding inspired by classical architecture. This fine design will have a magnificent effect on your space. Elite Decor is one of the leading manufacturers of Polyurethane mouldings.   TECHNICAL DETAILS Width:3.5 cm Height:7.1 cm Length:200 cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs. For ideas or inspiration have a look at our Instagram page

CR863B Panel Moulding Corner

18 x 18 x 1.5 cm

A classical panel moulding corner inspired by classical architecture. This fine design will have a magnificent effect on your space. Elite Decor is one of the leading manufacturers of Polyurethane mouldings.   TECHNICAL DETAILS Width:18 cm Height:18 cm Thickness:1.5 cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs. For ideas or inspiration have a look at our Instagram page
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information