Orac P5021 Flex

In Stock

L 200 x H 3.1 x W 0.9 cm

£49.00

In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Compare
SKU: 5414433039554
Category:

Description

Orac P5021F

200 x 3.1 x 0.9 cm

Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all!

TECHNICAL DETAILS
Rmin (flex):0,2 m
R*min (flex):0,7 m
Width:0.9 cm
Height:3.1 cm
Length:200 cm

The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.

When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.

When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.

 

For ideas or inspiration have a look at our Instagram page

Reviews

There are no reviews yet.

Be the first to review “Orac P5021 Flex”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsOrac P5021 Flex removeOrac P20 removeElite Decor CR810C removeElite Decor CR863A removeOrac P5020 removeOrac P4020A remove
ImageOrac Decor P5021FOrac P20Elite Decor CR863BElite Decor CR863AOrac Decor P5020Orac Decor P4020a
SKU541443303955454144330399055426283881689917830569046054144330395235414433039943
Rating
Price£49.00£8.20£6.00£13.00£54.50£14.40
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

DescriptionL 200 x H 3.1 x W 0.9 cm6.1 x 6.1 x 0.8 –  6.5 cmL 14.5 x H 14.5 x W 1.8 cmL 22 x H 22 x W 2.3 cm200 x 3.1 x 0.9 cmL 16.4 x H 2.9 x W 9.1 cm
Content

Orac P5021F

200 x 3.1 x 0.9 cm

Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all! TECHNICAL DETAILS Rmin (flex):0,2 m R*min (flex):0,7 m Width:0.9 cm Height:3.1 cm Length:200 cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.   For ideas or inspiration have a look at our Instagram page

Orac P20

6.1 x 6.1 x 0.8 –  6.5 cm

A simple shaped flower will add the finishing detail to a perfect wall frame. TECHNICAL DETAILS Width:0.8 cm Height:6.1 cm Length:6.1 cm Diameter:6.5 cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs. For ideas or inspiration have a look at our Instagram page

CR810C Panel Mouldings Corner

14.5 x 14.5 x 1.8 cm

A classical panel moulding corner inspired by classical architecture. This fine design will have a magnificent effect on your space. Elite Decor is one of the leading manufacturers of Polyurethane mouldings.   TECHNICAL DETAILS Thicknes:1.8 cm Height:14.5 cm Length:14.5 cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs. For ideas or inspiration have a look at our Instagram page

CR863A Panel Moulding Corner

20 x 20 x 2.3 cm

A classical panel moulding corner inspired by classical architecture. This fine design will have a magnificent effect on your space. Elite Decor is one of the leading manufacturers of Polyurethane mouldings.   TECHNICAL DETAILS Width:22 cm Height:22 cm Thickness:2.3 cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs. For ideas or inspiration have a look at our Instagram page

Orac P5020

200 x 9.1 x 1.3 cm

Simple, flat panel moulding with a linear design. Combine it with P5020B for a stylish wall frame. TECHNICAL DETAILS Width:1.3 cm Height:9.1 cm Length:200 cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.   For ideas or inspiration have a look at our Instagram page

Orac Decor P4020A

L 16.4 x H 2.9 x W 9.1 cm Rounded corner for panel moulding P4020 to create lovely wall frames. TECHNICAL DETAILS Width:9.1 cm Height:2.9 cm Length:16.4cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs. For ideas or inspiration have a look at our Instagram page  
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information