| Content | CX188 Indirect Lighting
L 200 x H 3.4 x W 3 cm
Rounded compact design profile for indirect LED lighting. The subtle shadow line adds to the lighting’s ambiance. This item is also available in flex for use on curved walls and ceilings CX188F
Designed by Orio Tonini.
TECHNICAL DETAILS
Width:3 cm
Height:3.4 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | CX188F Indirect Lighting
L 200 x H 3.4 x W 3 cm
Flexible version of the CX188. Rounded compact design profile for indirect LED lighting. Thanks to its Flex technology, curved walls and surfaces are no problem. Please note this is a flexible product used to go around curved walls and ceilings. This item is also available in non-flex CX188
Designed by Orio Tonini.
TECHNICAL DETAILS
Width:3 cm
Height:3.4 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac C902 Cornice mouldings Indirect lighting
200 x 10.3 x 10.3 cm
Small uplighter lighting trough inspired from ovolo shape – use lighting systems for a beautiful creative warm glow on the ceiling. Lends depth and drama.
With its modern and austere lines, this reference subtlety combines beauty and functionality. Horizontal and vertical lines smoothly merge into each other. It also feature an attractive shadow line.
These covings conceal LED indirect light and allow the creation of subtle lighting effects. All references will bring warmth to a room, and take away the harshness of a single central pendant light fitting. Compact LEDs are easy to install, cost little to run and have a long life whilst being environmentally friendly.
TECHNICAL DETAILS
Width:10.3 cm
Height:10.3 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac C361
200 x 5 x 5 cm
Inspired by the 1930’s, the familiar double joint of this ‘Stripe’ profile accentuates its ultra-sober design. Details that ensure extra finesse for a stylish indirect lighting. This profile will modernise any interior.
With its modern and austere lines, this reference subtlety combines beauty and functionality. Horizontal and vertical lines smoothly merge into each other. It also feature an attractive shadow line.
These covings conceal LED indirect light and allow the creation of subtle lighting effects. All references will bring warmth to a room, and take away the harshness of a single central pendant light fitting. Compact LEDs are easy to install, cost little to run and have a long life whilst being environmentally friendly.
TECHNICAL DETAILS
Width:5 cm
Height:5 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | C395 Steps
L 200 x H 15.5 x W 3.1 cm
A clean, modern profile from the Steps range. Here we fix the largest section to the ceiling, making the space seem wider. The angled corners above and below provide additional subtle shadow lines. Designed by Orio Tonini.
Width:3.1 cm
Height:15.5 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac C991
200 x 11 x 14 cm
A contemporary cornice for a multitude of applications. With the additional installation support, this profile can perfectly hide curtain systems. And what do you think of integration with LED lighting? Ideal as a mood creator.
TECHNICAL DETAILS
Width:14 cm
Height:11 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page |
Reviews
There are no reviews yet.