| Content | CX188F Indirect Lighting
L 200 x H 3.4 x W 3 cm
Flexible version of the CX188. Rounded compact design profile for indirect LED lighting. Thanks to its Flex technology, curved walls and surfaces are no problem. Please note this is a flexible product used to go around curved walls and ceilings. This item is also available in non-flex CX188
Designed by Orio Tonini.
TECHNICAL DETAILS
Width:3 cm
Height:3.4 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac C382
200 x 14 x 5 cm
With this modern profile, you can perfectly integrate indirect LED lighting into your interior.
Want to take it to the next level Combine it with the other L3 profiles (C380, C381, C383) and create a sophisticated linear pattern of light and shadow.
TECHNICAL DETAILS
Width:5 cm
Height:14 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | C900 Cornice mouldings
200 x 17.1 x 14.6 cm
Big uplighter lighting trough inspired from ovolo shape – use lighting systems for a beautiful creative warm glow on the ceiling. Lends depth and drama.
These substantial sizes are ideal for larger rooms.
These covings conceal LED indirect light and allow the creation of subtle lighting effects. All references will bring warmth to a room, and take away the harshness of a single central pendant light fitting. Compact LEDs are easy to install, cost little to run and have a long life whilst being environmentally friendly.
TECHNICAL DETAILS
Width:14.6 cm
Height:17.1 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac C361
200 x 5 x 5 cm
Inspired by the 1930’s, the familiar double joint of this ‘Stripe’ profile accentuates its ultra-sober design. Details that ensure extra finesse for a stylish indirect lighting. This profile will modernise any interior.
With its modern and austere lines, this reference subtlety combines beauty and functionality. Horizontal and vertical lines smoothly merge into each other. It also feature an attractive shadow line.
These covings conceal LED indirect light and allow the creation of subtle lighting effects. All references will bring warmth to a room, and take away the harshness of a single central pendant light fitting. Compact LEDs are easy to install, cost little to run and have a long life whilst being environmentally friendly.
TECHNICAL DETAILS
Width:5 cm
Height:5 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac C358
200 x 7.3 x 14 cm
The unexpected slanting angle of the ‘Rail’ is impossible to imitate but also gives the design a very special look. A shadow joint completes the picture. A surprising design that optimises light distribution. This profile will modernise any interior.
With its modern and austere lines, this reference subtlety combines beauty and functionality. Horizontal and vertical lines smoothly merge into each other. It also feature an attractive shadow line.
These covings conceal LED indirect light and allow the creation of subtle lighting effects. All references will bring warmth to a room, and take away the harshness of a single central pendant light fitting. Compact LEDs are easy to install, cost little to run and have a long life whilst being environmentally friendly.
TECHNICAL DETAILS
Width:14 cm
Height:7.3 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac C374
200 x 18 x 5 cm
The Antonio concept, designed by top designer Ulf Moritz,consists out of 2 modernist profiles (C373 and C374). The installation of one or more of these profiles strengthens the existing architecture of your interior.
The products are made of a higher density Purotouch, which makes them not only suitable for walls and ceilings but alsoas a skirting board.
TECHNICAL DETAILS
Width:5 cm
Height:18 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page |
Reviews
There are no reviews yet.