| Content | Orac C393 Cornice Moulding
200 x 15 x 21 cm
A sleek profile within the Steps range. C393 is perfect as a modern cornice. When installed as an original border, it creates additional height and gives your space an extra dimension. The chamfered corners at the top and bottom also create a subtle line of shadow that further accentuates the linear pattern.
Design: Orio Tonini
TECHNICAL DETAILS
Width:21 cm
Height:15 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | P835 Cornice Mouldings
200 x 7.9 x 8.7 cm
A classical cornice moulding inspired by classical architecture. This fine design will have a magnificent effect on your space.
Elite Decor is one of the leading manufacturers of Polyurethane mouldings.
TECHNICAL DETAILS
Width:7.9 cm
Height:8.7 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | P806 Cornice Mouldings
200 x 13 x 10.4 cm
A classical cornice moulding inspired by classical architecture. This fine design will have a magnificent effect on your space.
Elite Decor is one of the leading manufacturers of Polyurethane mouldings.
TECHNICAL DETAILS
Width:13 cm
Height:10.4 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac C351
200 x 7.4 x 17.4 cm
Cleanly curved, generous profile which creates a lovely interplay of light and shadow. Use our indirect lighting profiles to provide your space with an instant upgrade. Designed by Jacques Vergracht. Installation remark: It is necessary to screw this profile on the wall.
TECHNICAL DETAILS
Width:17.4 cm
Height:7.3 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | P856 Cornice Mouldings
200 x 6.8 x 10 cm
A classical coving / cornice moulding inspired by classical architecture. This fine design will have a magnificent effect on your space.
Elite Decor is one of the leading manufacturers of Polyurethane mouldings.
TECHNICAL DETAILS
Width:6.8 cm
Height:10 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | P804 Cornice Mouldings
200 x 14.2 x 11.2 cm
A stately cornice moulding inspired by classical architecture. This fine design will have a magnificent effect on your space.
Elite Decor is one of the leading manufacturers of Polyurethane mouldings.
TECHNICAL DETAILS
Width:11.2 cm
Height:14.2 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page |
Reviews
There are no reviews yet.