| Content | C396 Steps
L 200 x H 18.5 x W 6.1 cm
This clean, modern profile from the Steps range can also be used to conceal LED lighting. The angled corners above and below provide additional subtle shadow lines. Designed by Orio Tonini.
Width:6.1 cm
Height:18.5 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | C211 Cornice Coving Mouldings
200 x 11.6 x 4.8 cm
Classic cornice moulding with detailed pattern of foliage. This moulding will become an eye-catching focus of your interior.
TECHNICAL DETAILS
Width:4.8 cm
Height:11.6 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | C212 Cornice Coving Mouldings
200 x 7.5 x 4.5 cm
This egg-and-dart cornice moulding is inspired by classical architecture. The lovely, finely detailed design is completely at home in both traditional and modern spaces.
TECHNICAL DETAILS
Width:7.5 cm
Height:4.5 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | P856 Cornice Mouldings
200 x 6.8 x 10 cm
A classical coving / cornice moulding inspired by classical architecture. This fine design will have a magnificent effect on your space.
Elite Decor is one of the leading manufacturers of Polyurethane mouldings.
TECHNICAL DETAILS
Width:6.8 cm
Height:10 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | P886 Cornice Mouldings
200 x 5 x 19 cm
A classical coving / cornice moulding inspired by classical architecture. This fine design will have a magnificent effect on your space.
Elite Decor is one of the leading manufacturers of Polyurethane mouldings.
TECHNICAL DETAILS
Width:5 cm
Height:19 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | C211F Cornice Coving Mouldings
200 x 11.6 x 11.2 cm
A classic Flexible cornice with dental blocks inspired by Georgian/Edwardian styles. Check also C422.
A decorative design, inspired by classical master pieces, adorned with fine details, that can bring back the character of a renovated house or contrasts with modern elements to enrich any setting.
Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all!
TECHNICAL DETAILS
Rmin (flex):2,5 m
Width:11.2 cm
Height:11.6 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page |
Reviews
There are no reviews yet.