Content | W106 – Envelop
L 33.3 x H 2.9 x W 33.3 cm
Envelop is part of the 3D Wall Panels collection. Release your creativity and design a unique work of art that is a perfect fit for you and your interior. Play around with various shapes and use fun colour accents as a finishing touch. Designed by Orio Tonini.
TECHNICAL DETAILS
Width:33.3 cm
Height:2.9 cm
Length:33.3 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | W105 – Rombus
30 x 34.6 x 3 cm
The geometric design Rombus is part of the 3D Wall Panels collection. It is the basic ingredient for endless creative applications and can be combined with Rombus W100 and Trapezium W101. Create sleek patterns or a playful interpretation using bright accent colours.
TECHNICAL DETAILS
Width:3 cm
Height:34.6 cm
Length:30 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac W120 AUTOIRE
L 150 x H 3.2 x W 50 cm
The W120 Wall Panel is unique: a ready-made wall panel with a lot of detail for easy, fast and beautifully finished installation. It is an economical solution for wall depth creation and can be made even more dynamic by filling it up with our insert W122 and/or W123.
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac WX205
L 200 x H 200 x W 1.3 cm Purotouch
Get your interior right on TRACK with this linear WX205 wall panel. Its rectangular, fluted lines are presented in two sets of proportions as the product can be used on both sides. The choice is yours. RIPPLE and TRACK are Orac Decor’s newest 3D Wall Covering panels, now available in Duropolymer and longer lengths for the first time to empower your walls. Perfect to cover full ceiling heights in one go or for low wainscoting in demanding environments. Only side A is primed. On side B, use two coats of final paint or apply a primer coat first, followed by the final paint.
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | W130 CHEVRON
L 200 x H 1.9 x W 40 cm
Our W130 Chevron is a classic flooring pattern that we now extend to the walls for an instant luxury feeling. Finished side edges and smart design allow fast and easy installation. Cover a whole wall, or accentuate a part of the room (eg chimney, headboard…). It also has proven positive thermal and acoustic properties.
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | W110 HILL
L 200 x H 25 x W 1.6 cm
3D Wall Covering with repetitive design is trending, it adds extra design and dimension to your space and creates a wide range of opportunities to personalise your interior. The W110 Hill profiles, designed by Orio Tonini, are easy to install and are made from sustainable materials. In addition, they have proven positive thermal and acoustic properties. To cover 1 square meter you need 2 pieces.
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page |
Reviews
There are no reviews yet.