| Content | Orac WX204
L 200 x H 200 x W 1.6 cm Purotouch
WX204 RIPPLE reads like the pages of a good book. Its bevelled lines and origami-like folds are available in two proportions as the product can be used on both sides, the choice is yours. RIPPLE and TRACK are Orac Decor’s newest 3D Wall Covering panels, now available in Duropolymer and longer lengths for the first time to empower your walls. Perfect to cover full ceiling heights in one go or for low wainscoting in demanding environments. Only side A is primed. On side B, use two coats of final paint or apply a primer coat first, followed by the final paint.
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac Decor W212 Valley Loop
L 200 x H 25 x W 1.2 cm
W212 VALLEY LOOP is a charming addition to the VALLEY family with its neo-deco twist and luxurious loops that transport us back to the glamour of the Art Deco era. Together with VALLEY and VALLEY XL you can create refined walls with elegant proportions, ready to bring walls and colours to life. Trim with our newest PX209 RIBBON for extra cachet.
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac W122 AUTOIRE
L 33.3 x H 2.6 x W 33.3 cm
The W122 is one of the insert options for our ready-made wall panels. Fit four of them in the W120 or one in the W121. Mix and match with our other insert option W123.
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | W110 HILL
L 200 x H 25 x W 1.6 cm
3D Wall Covering with repetitive design is trending, it adds extra design and dimension to your space and creates a wide range of opportunities to personalise your interior. The W110 Hill profiles, designed by Orio Tonini, are easy to install and are made from sustainable materials. In addition, they have proven positive thermal and acoustic properties. To cover 1 square meter you need 2 pieces.
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | W114 VALLEY XL
L 200 x H 25 x W 1.5 cm Purotouch
W114 VALLEY XL is the newest addition to Orac's 3D Wall Covering family. Also designed by Orio Tonini, it builds on the success of W109 VALLEY, as it's its larger version. Together this perfectly balanced duo offers endless possibilities to cover your walls with personality. Play with the rhythm of the different sizes and make rooms and colours come to life.
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | W105 – Rombus
30 x 34.6 x 3 cm
The geometric design Rombus is part of the 3D Wall Panels collection. It is the basic ingredient for endless creative applications and can be combined with Rombus W100 and Trapezium W101. Create sleek patterns or a playful interpretation using bright accent colours.
TECHNICAL DETAILS
Width:3 cm
Height:34.6 cm
Length:30 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page |
Reviews
There are no reviews yet.