| Content | Orac SX155
200 x 10.8 x 2.5 cm
What architect Xavier Donck says about this profile: “This low skirting board creates like no other cosyness. It breaks the bare transition from wall to floor and dresses up a cold space in a warm atmosphere. In short, essential…”
Our skirting boards are impact and water-resistant, already primed and easy to paint. Most feature chambers to conceal cables. The polymer material sets the highest standards for quality and durability.
Exists in Flex. Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all!
TECHNICAL DETAILS
Width:2.5 cm
Height:10.8 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac SX138 Flex
200 x 13.8 x 1.5 cm
Flexible version of the SX138. This tall, rounded profile provides your wall with a classic finish. Thanks to its Flex technology, curved walls and surfaces are no problem. Installation remark: It is necessary to screw this profile on the wall. Flex Radius: R min = 40 cm
Our skirting boards are impact and water-resistant, already primed and easy to paint. Most feature chambers to conceal cables. The polymer material sets the highest standards for quality and durability.
TECHNICAL DETAILS
Width:1.5 cm
Height:13.8 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac SX105
200 x 10.8 x 1.3 cm
Contemporary skirting board with grooves. The restrained design creates an elegant transition between the floor and the wall.
Our skirting boards are impact and water-resistant, already primed and easy to paint. Most feature chambers to conceal cables. The polymer material sets the highest standards for quality and durability.
Exists in Flex. Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all!
TECHNICAL DETAILS
Width:1.3 cm
Height:10.8 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac SX138
200 x 13.8 x 1.5 cm
A tall, rounded profile provides your wall with a classic finish. Check also SX122 and SX137 for smaller models.
Our skirting boards are impact and water-resistant, already primed and easy to paint. Most feature chambers to conceal cables. The polymer material sets the highest standards for quality and durability.
TECHNICAL DETAILS
Width:1.5 cm
Height:13.8 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac SX162
200 x 4 x 1 cm
Orac’s simplest panel moulding is part of the SQUARE family. Use this multifunctional profile to fit your entire home with the same moulding. All you need to do is select the correct size to fit your space.
TECHNICAL DETAILS
Width:1 cm
Height:4 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac SX137F
200 x 9.9 x 1.5 cm
Flexible version of the SX137. This medium-tall, rounded profile provides your wall with an elegant finish. Thanks to its Flex technology, curved walls and surfaces are no problem. Flex Radius: R min = 40 cm
Our skirting boards are impact and water-resistant, already primed and easy to paint. Most feature chambers to conceal cables. The polymer material sets the highest standards for quality and durability.
TECHNICAL DETAILS
Width:1.5 cm
Height:9.9 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page |
Reviews
There are no reviews yet.