| Content | Orac CX196 Cornice moulding
200 x 4 x 11.3 cm
Based on the iconic CX190 U-profile, the U-STEPS take on different shapes with ease. With a limited number of decorative mouldings, you can bring walls and entire interiors to life. The results are always unique.
TECHNICAL DETAILS
Width:11.3 cm
Height:4 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | C212 Cornice Coving Mouldings
200 x 7.5 x 4.5 cm
This egg-and-dart cornice moulding is inspired by classical architecture. The lovely, finely detailed design is completely at home in both traditional and modern spaces.
TECHNICAL DETAILS
Width:7.5 cm
Height:4.5 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | P821 Cornice Mouldings
200 x 5 x 7 cm
A classical cornice moulding inspired by classical architecture. This fine design will have a magnificent effect on your space.
Elite Decor is one of the leading manufacturers of Polyurethane mouldings.
TECHNICAL DETAILS
Width:5 cm
Height:7 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | P806 Cornice Mouldings
200 x 13 x 10.4 cm
A classical cornice moulding inspired by classical architecture. This fine design will have a magnificent effect on your space.
Elite Decor is one of the leading manufacturers of Polyurethane mouldings.
TECHNICAL DETAILS
Width:13 cm
Height:10.4 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | P856 Cornice Mouldings
200 x 6.8 x 10 cm
A classical coving / cornice moulding inspired by classical architecture. This fine design will have a magnificent effect on your space.
Elite Decor is one of the leading manufacturers of Polyurethane mouldings.
TECHNICAL DETAILS
Width:6.8 cm
Height:10 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac P3071 – Golf
200 x 37.2 x 7.6 cm
Ulf Moritz’s thoughts must have been at sea when he was designing this double rippled golf. Whether it is used as a cornice moulding, skirting, or as decorative ceiling border, it will certainly deliver a remarkable outline.
Combined on the wall horizontally or vertically, the effect is like a sculpture, a work of art that bursts with movement, light and shadow.
TECHNICAL DETAILS
Width:7.6 cm
Height:37.2 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page |
Reviews
There are no reviews yet.