| Content | Orac P9901
200 x 7 x 1.4 cm
A playful Napoleon hat to create more character to your installation.
Exists in Flex. Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all!
TECHNICAL DETAILS
Rmin (flex):0,2 m
R*min (flex):1,8 m
Width:1.4 cm
Height:7 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | CR810 Panel Mouldings
200 x 1.8 x 4 cm
A classical panel moulding inspired by classical architecture. This fine design will have a magnificent effect on your space.
Elite Decor is one of the leading manufacturers of Polyurethane mouldings.
TECHNICAL DETAILS
Width:1.8 cm
Height:4 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac P1020
200 x 4.9 x 2.4 cm
The intertwined spiral acanthus leaves and almonds of this ornament will bring a bucolic atsmosphere indoors.
Exists in Flex. Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all!
TECHNICAL DETAILS
Width:2.4 cm
Height:4.9 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac P3070 – Radius
200 x 12.5 x 3.2 cm
The versatile Radius is one of Ulf Moritz’s favourites, simply because it is so simple and distinguished. Powerful enough to stand alone, but also offers endless possibilities used in combination.
Why not create a skirting with all the Radius profiles on top of one another?
TECHNICAL DETAILS
Width:3.2 cm
Height:12.5 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac P3020F Flexible Panel Moulding
200 x 6.1 x 3.2 cm
Organic pattern with a beautiful acanthus leaf pattern. To create interiors with personality, use with C338, C338A, C338B, P3020A. Did you know? Leaf borders and scroll motifs were used extensively in the art and architecture of ancient Greece and Rome. Foremost of these was the acanthus motif. Some say the acanthus, one of the oldest flowers in the Mediterranean area, represents long life. Throughout most of its long history the leaf ornament generally known as acanthus is in fact an imaginary leaf used for its beautiful shape.
A decorative design, inspired by classical master pieces, adorned with fine details, that can bring back the character of a renovated house or contrasts with modern elements to enrich any setting.
TECHNICAL DETAILS
Rmin (flex):0,5 m
R*min (flex):1,8 m
Width:3.2 cm
Height:6.1 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page | Orac P4020
200 x 5 x 2.9 cm
Soft baroque curls and minimalistic design meet up to integrate past and future. Not avant-garde, not antique, simply unique.
Exists in Flex. Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all!
TECHNICAL DETAILS
Width:2.9 cm
Height:5 cm
Length:200 cm
The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.
When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.
When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.
For ideas or inspiration have a look at our Instagram page |
Reviews
There are no reviews yet.