Orac PX120

In Stock

L 200 x H 4 x W 1.9 cm

£14.50

In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Compare
SKU: 5414433037505
Category:

Description

Orac PX120

200 x 4 x 1.9 cm

Soft baroque curls and minimalistic design meet up to integrate past and future. Not avant-garde, not antique, simply unique. This profile can be used as a base cap to finish off the bottom of a baseboard, especially when the floors are not even (to hide a gap). Bigger brother to PX103. Use the PX120A wall panel corner to make frames on your wall. Works well with the SX118 skirting board.

Use panel mouldings to create wall frames or wainscoting.? These can? evoke the atmosphere of stately homes, and tastefully protect your walls. They are equally suitable for both modern and classical homes, and can bring texture to any wall.

Exists in Flex. Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all!

TECHNICAL DETAILS
Width:1.9 cm
Height:4 cm
Length:200 cm

The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training.

When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces.

When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs.

For ideas or inspiration have a look at our Instagram page

Reviews

There are no reviews yet.

Be the first to review “Orac PX120”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsOrac PX120 removeOrac P101A removeOrac P1020 removeElite Decor CR807 removeElite Decor CR863B removeElite Decor CR911 remove
ImageOrac Decor PX120Orac Decor P101aOrac Decor P1020Elite Decor CR807Elite Decor CR863BElite Decor CR911
SKU541443303750554144330399295414433039424695477077666273870643028487543789998029
Rating
Price£14.50£21.70£35.40£14.00£6.00£37.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

DescriptionL 200 x H 4 x W 1.9 cmL 24.5 x H 24.5 x W 2.4 cmL 200 x H 4.9 x W 2.4 cmL 200 x H 5.4 x W 1.5 cmL 18 x H 18 x W 1.5 cmL 200 x H 7.1 x W 3.5 cm
Content

Orac PX120

200 x 4 x 1.9 cm

Soft baroque curls and minimalistic design meet up to integrate past and future. Not avant-garde, not antique, simply unique. This profile can be used as a base cap to finish off the bottom of a baseboard, especially when the floors are not even (to hide a gap). Bigger brother to PX103. Use the PX120A wall panel corner to make frames on your wall. Works well with the SX118 skirting board. Use panel mouldings to create wall frames or wainscoting.? These can? evoke the atmosphere of stately homes, and tastefully protect your walls. They are equally suitable for both modern and classical homes, and can bring texture to any wall. Exists in Flex. Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all! TECHNICAL DETAILS Width:1.9 cm Height:4 cm Length:200 cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs. For ideas or inspiration have a look at our Instagram page

Orac P101A

24.5 x 24.5 x 2.4 cm

The intertwined spiral acanthus leaves and almonds of this ornament will bring a bucolic atmosphere indoors. TECHNICAL DETAILS Width:2.4 cm Height:24.5 cm Length:24.5 cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs. For ideas or inspiration have a look at our Instagram page

Orac P1020

200 x 4.9 x 2.4 cm

The intertwined spiral acanthus leaves and almonds of this ornament will bring a bucolic atsmosphere indoors. Exists in Flex. Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all! TECHNICAL DETAILS Width:2.4 cm Height:4.9 cm Length:200 cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs. For ideas or inspiration have a look at our Instagram page

CR807 Panel Mouldings

200 x 1.5 x 5.4 cm

A classical panel moulding inspired by classical architecture. This fine design will have a magnificent effect on your space. Elite Decor is one of the leading manufacturers of Polyurethane mouldings.   TECHNICAL DETAILS Width:1.5 cm Height:5.4 cm Length:200 cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs. For ideas or inspiration have a look at our Instagram page

CR863B Panel Moulding Corner

18 x 18 x 1.5 cm

A classical panel moulding corner inspired by classical architecture. This fine design will have a magnificent effect on your space. Elite Decor is one of the leading manufacturers of Polyurethane mouldings.   TECHNICAL DETAILS Width:18 cm Height:18 cm Thickness:1.5 cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs. For ideas or inspiration have a look at our Instagram page

CR911 Panel Mouldings

200 x 3.5 x 7.1 cm

A classical panel moulding inspired by classical architecture. This fine design will have a magnificent effect on your space. Elite Decor is one of the leading manufacturers of Polyurethane mouldings.   TECHNICAL DETAILS Width:3.5 cm Height:7.1 cm Length:200 cm The correct use of Adhesives and Joiners is very important! Please watch our installation videos for training. When installing this product we recommend using Orac Decor FDP700 adhesive for the perfect fix. Specially formulated for new builds or on recently plastered walls, for outdoor applications and non-porous surfaces. When joining this product we recommend using Orac Decor FX200 joiner for joining lengths together for the perfect finish. For seam joints between the mouldings. Push the profiles strongly to each other and remove excess of FX200 preferably before hardening (wait at least two hours) with acetone or Synth Thinner. The joiner can be painted after 24 hrs. For ideas or inspiration have a look at our Instagram page
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information